When more than a year creeps by before one realizes that a two-part article was left unfinished (with just the initial piece published), it is a commentary on one or more of the following issues: I am aging and my memory is taking a beating; I have too many irons in the fire and my memory is lagging; I am completely disorganized and distracted by too many activities and my memory failing. The reality is that all three are true.
Last July (the one that occurred in 2018), I published an article about restoring a 60+ year old chunk of Louisville lumber that bears the name of one of my favorite ball players and former WWII U.S. Army Air Forces airman, Ferris Fain (see: Close to Completion: Restoring a 1950s Ferris Fain Signature Model Bat). The article in question has been one of Chevrons and Diamonds more popular pieces as it seems that there are many collectors who are seeking to rejuvenate their aging, decaying and damaged vintage bats. Fortunately for me, the condition of the Ferris Fain signature model Louisville Slugger bat wasn’t bad and it was absent any damage.
In the absence of vintage baseball bat restoration manuals or step-by-step guides, I had to tap into the resources available to me. Turning to my bat-collecting colleagues, I gathered tips from those who have touched on certain aspects of revitalizing the wood, slowing progress of wood rot and breathing new life into the black foil brand marks. It was also helpful that I spent time in doing extracurricular work many years ago (in high school) at the invitation of my high school principal to perform some restoration work on several vintage wood administration chairs (I was a very giving person with my advice for certain teachers) over the course of a week at the end of my sophomore year.
Despite removing very little wood material with the steel wool (sanding would have removed the patina and usage markings entirely), the surface of the bat had a fairly fresh appearance once all of the cleaner had dried. Also, my free-hand restoration of the brand (with an ultra-fine black paint pen) looked a little sloppy and too vibrant in places. Since the goal was to retain as much of the original patina and scars, I first took the steel wool over the fresh brands to remove some of the material before applying the linseed oil treatment. I also left the bat to sit untreated for a few months to allow for some oxidation and darkening of the wood before sealing it with the oil, which is where I left off in early July of 2018.
By winter, the wood of the bat darkened quite a bit. After wiping the bat down with a cloth to remove any dust or particulates that settled onto the surface over the previous several months, I cracked open the linseed oil, soaked a wad of paper towels and began to cover the bat from the bottom, working my way upward towards the handle and knob, leaving the bat saturated with the material. Leaving the bat to stand (vertically, with the handle up) for an hour allowing for the wood grain to absorb the oil. When I returned, I reapplied the oil as before and again left the bat to stand in order to allow for absorption.
After a few days of standing in the garage, the bat’s surface was dry and felt as though it needed to be rubbed out with a terry shop cloth. Through this process, excess oil was lifted and the bat’s surface responded with a satin shine that enhanced the aged patina. The oil naturally darkened and drew out the wood-grain while providing a true vintage aesthetic to the finished product.
Since completing the Fain bat, I faced a more daunting challenge when a 1940s U.S. Navy stamped Ted Williams endorsed Hillerich & Bradsby bat arrived (see: Ted Williams: BATtered, Abused and Loved). Drawing upon the Fain bat experience, the Williams and subsequent bat restorations have become a fairly simple process.